Another Motion Left way to get away from old leaky carbs. Install this intake, and you can run any Dellorto SHA you want.
This is a 15mm ID intake, machined and ready to go. Finished in an Electrocoat Enamel which will last longer then your moped!
Made in the USA!
A Note about these intakes They have an 19mm mounting flange for the 15.15 series SHA carbs If you are ordering an 15mm SHA from us it will come with an 19mm shim already in place.
However if you are using your own SHA carb please measure the ID of the clamping area on the carb and make sure it is 19mm. If it is not we have 19x21mm shims available here. In addition if you plan on using this with one of our 14.12 SHA carbs please also pick up an 19mm shim as those carbs ship with 18mm ones.